gurcell
09-09-2008, 15:39
http://www.audiforums.com/forum/showthread.php?t=80267
Hey guys, I've got a 98 1.8T. I've had a k04 and chip for a while and wanted to get more performance. I was recommended to port and polish the intake and exhaust. We found out they used abrasive material to do it like gritty sand. So I got with my friend that tunes Hondas and we decided to try it ourselves. We got a bag of sandblasting sand and hooked up into the intake and started the car. We had to hold the gas so it would run. He wanted to let the engine suck in the sand through the intake so it would port it out and then push it out the ehxaust so it would port the exhaust manifold.
I was worried that it might cause problems but he figured it'd be OK as long as we didn't make boost and it get sucked in the turbo. After running the car and letting it suck in sand we got about half way through a 25 lb bag. The check engine light was on and the engine was bucking and kicking and sounding really weird. We stopped and hooked the car back up normal and took off the sand supply. We tried to start it again and it was really hard. Once started it couldn't idle and kept making weird noises. We took it out and drove it and it started to make scraping and knocking noises.
Help! Can anyone tell me what to do! My buddy only does Hondas so he doesn't know much about Audis.
Türkçesi şu, benim arabam audi 1.8T , bana dediler ki port polish yapalım. Benim de hondacı bir arkadaşım var, oda kumlayalım dedi. Bende gittim kumlama için gerekli olan kumu aldık. Bastık kumu emme ağzından içeri, gazı da sonuna kadar açtık. Şimdi aracım zor çalışıyor, bide sürtünme ve vuruntu sesleri geliyor. Benim hondacı kanka audilerden anlamıyor, bana yardım edin...
PS: Sana en büyük yardım seni çölde susuz bırakmak olur :lol: :D:D
Hey guys, I've got a 98 1.8T. I've had a k04 and chip for a while and wanted to get more performance. I was recommended to port and polish the intake and exhaust. We found out they used abrasive material to do it like gritty sand. So I got with my friend that tunes Hondas and we decided to try it ourselves. We got a bag of sandblasting sand and hooked up into the intake and started the car. We had to hold the gas so it would run. He wanted to let the engine suck in the sand through the intake so it would port it out and then push it out the ehxaust so it would port the exhaust manifold.
I was worried that it might cause problems but he figured it'd be OK as long as we didn't make boost and it get sucked in the turbo. After running the car and letting it suck in sand we got about half way through a 25 lb bag. The check engine light was on and the engine was bucking and kicking and sounding really weird. We stopped and hooked the car back up normal and took off the sand supply. We tried to start it again and it was really hard. Once started it couldn't idle and kept making weird noises. We took it out and drove it and it started to make scraping and knocking noises.
Help! Can anyone tell me what to do! My buddy only does Hondas so he doesn't know much about Audis.
Türkçesi şu, benim arabam audi 1.8T , bana dediler ki port polish yapalım. Benim de hondacı bir arkadaşım var, oda kumlayalım dedi. Bende gittim kumlama için gerekli olan kumu aldık. Bastık kumu emme ağzından içeri, gazı da sonuna kadar açtık. Şimdi aracım zor çalışıyor, bide sürtünme ve vuruntu sesleri geliyor. Benim hondacı kanka audilerden anlamıyor, bana yardım edin...
PS: Sana en büyük yardım seni çölde susuz bırakmak olur :lol: :D:D