ep3 rbc

[Onur typer]

mugen beyınle kullanan varmı sıkıntı cıkarıomu afr kaclarda oluyor

[miniks]

Mugen zaten zengin çalışıyor

bir sıkıntı olmaz devam :)

[Cimmeria]

kprosuz orjinal beyne taksak ne olur ? artısı olur mu ?

[Onur typer]

Mugen zaten zengin çalışıyor

bir sıkıntı olmaz devam :)

eyv. kanka panel kesmıoruz demı ayrıca bulurmuyuz almak ıstersek getırtcezmı yoksa

[_muhaRRem]

hondata conta takmazsan panel kesmene gerek kalmaz.. panel zatenn servis fiyatı 114 tl gibi bi rakam olucaktı .

[Onur typer]

hondata conta takmazsan panel kesmene gerek kalmaz.. panel zatenn servis fiyatı 114 tl gibi bi rakam olucaktı .

almak ıllakı gerekmı pekı contayı mugen beyın oldugu ıcın bıraz detaya ınıorum kardesım

[seko]

onur skunk2 vs rbc diye bir sor birde bakalım ??

[Onur typer]

sen sordun bıle kanka skunk 2mı rbc mı daha ıyı dıe sorduk gıttı madem :D

[seko]

sen sordun bıle kanka skunk 2mı rbc mı daha ıyı dıe sorduk gıttı madem :D

baya bir iddalılar :icon_tup:
"Skunk2’s Pro Series Intake Manifold for Honda’s K-series has arrived. Skunk2 engineers looked to the popular ’06+ Civic Si’s RBC intake manifold for inspiration and went back to the drawing board. Skunk2’s Pro Series Intake Manifold for Honda’s K-series features a larger plenum and shorter, oversized runners when compared to the RBC, and is cast with thicker wall material, leaving room for further porting for high-horsepower applications. Instead of producing a manifold with a significantly oversized plenum and excessively short runners that would sacrifice mid-range power, the Pro Series manifold was designed for the “street enthusiast” who wants more power but doesn’t want to sacrifice mid-range performance to get it. The results are improved airflow, an enhanced venturi effect, and both mid-range and top-end power gains.

Skunk2’s all-new, cast-aluminum Pro Series Intake Manifold for Honda’s K-series is a direct-fit replacement for all K20/K24 engines ('06 Civic Si application coming soon) thanks to its unique, patent-pending water neck design and throttle body flange, which is compatible with OEM throttle bodies as well as those as large as 76mm. The special water neck design eliminates the cutting that would otherwise be involved with some RBC applications and the supplied thermal-insulated intake manifold gasket makes for a truly bolt-on installation (no drilling or modifying required). Pro Series manifolds also incorporate an angled-runner design, which allows for ample hood clearance on ’88-’00 Civics and ’90-’01 Integras with K-series engine swaps, as well as additional core support clearance on ’02-’05 Civic Sis.

Pro Series Intake Manifolds offer horsepower and torque gains greater than the popular RBC manifold but without compromising mid-range power output. The design incorporates runners that are similar in length to the RBC’s but with larger bores, a special tapered design, as well as a larger, tapered plenum that together preserve mid-range power but increase and accelerate airflow to allow for significant top-end power gains. Pro Series Intake Manifold runner exits are also machined and hand-finished to best match the cylinder head’s ports. Skunk2’s Pro Series Intake Manifold’s shape and design also increases wave scavenging effects at the engine’s ideal operating range, which allow for a broad increase in usable power.

Skunk2 is a familiar name in the intake manifold business, with more than 10 years of experience designing, testing, and building them. Similar to OEM manifolds, Skunk2’s Pro Series Intake Manifolds are shell-molded and CNC-machined for superior strength, a precise fit, and a high-quality finish. Each manifold is molded with smooth transitions from the throttle body opening to the plenum to the runners with clean parting lines for an optimal finish, both inside and out.

FEATURES:
Increased Mid-Range And Top-End HP And Torque
Unique Water Neck Adapter Eliminates Cutting
70mm Throttle Body Bore
Compatible With Up To 76mm Throttle Bodies
Thermal-Insulated Gasket Included
Angled Design For K-Swap Hood Clearance
High-Grade, 356-Aluminum Construction
OEM-Quality, Shell-Molded Casting
Skunk2 Nameplate
Vacuum-Tested For Quality
OEM Sensor Provisions"

[Ertan-R]

mugen beyınle kullanan varmı sıkıntı cıkarıomu afr kaclarda oluyor

kankam durmak yok yola devam:D

[miniks]

abi skunk2 manifold bana göre RBC nin birebir kopyası

aynı eski B serisi ilk manifoldları B18c manifoldunun aynısı oldugu gibi

kim ne derse desin oeme yakın bişi yerine oem tercih ederim ben

[Onur typer]

abi skunk2 manifold bana göre RBC nin birebir kopyası

aynı eski B serisi ilk manifoldları B18c manifoldunun aynısı oldugu gibi

kim ne derse desin oeme yakın bişi yerine oem tercih ederim ben

yanı haklısın kanka skunk 2 de zaten gumruk sorunu vs pekı oemı nası getırtcezz kaca maal ?