B.Aktepe
28-06-2010, 14:59
2L 10.1:1 JE pistons
Manley turbo tuff LS rods
89mm crank
GSR head
skunk2 pro series springs ,ret and valves
GSR Tranny w/ quafe diff
Comp Clutch twindisc setup
Titlon throw out bearing assembly
JDL front mount t4 divided manifold, down pipe and tubes all swaintech coated
dual 44 Tial gates
Bullseye s368 w/ 1.10 ar
Garrett 18x12x4.5 core with custom end tanks
Full Race Intake mani
BDL 72mm TB
AEM Series 2 ECU
M&W pro 14 ignition with CBR coils
Custom enclosed Relay box w/ Milspec plug
t1 Camtrigger
Racepak IQ3 display dash
the entire harness was custom built to my specs by my good friend Ryan @ Rywire
T1 ID2000s w/ skunk2 rail
Fuel Lab reg
Dual bosch 044 pumps
T1 catch can
Skunk2 Pro C suspension with drag rear spring rates along with their LCAs
Exospeed 3 piece front end
Exospeed star8 13x9 up front and 15x 3.5 rears
http://img.photobucket.com/albums/v504/sheepeg3/4613915647_7ed8a0a54b_b.jpg
http://img.photobucket.com/albums/v504/sheepeg3/4614538276_5bd5a58508_b.jpg
http://img.photobucket.com/albums/v504/sheepeg3/g-489-7f9487572e326b63c64050542b897.jpg
http://img.photobucket.com/albums/v504/sheepeg3/4614549966_019097aa16_o.jpg
http://img.photobucket.com/albums/v504/sheepeg3/100_0992.jpg
http://img.photobucket.com/albums/v504/sheepeg3/g-489-557e53c864644b61e78ce48482676.jpg
http://img.photobucket.com/albums/v504/sheepeg3/4564210993_0a5fe96cc1_o.jpg
Manley turbo tuff LS rods
89mm crank
GSR head
skunk2 pro series springs ,ret and valves
GSR Tranny w/ quafe diff
Comp Clutch twindisc setup
Titlon throw out bearing assembly
JDL front mount t4 divided manifold, down pipe and tubes all swaintech coated
dual 44 Tial gates
Bullseye s368 w/ 1.10 ar
Garrett 18x12x4.5 core with custom end tanks
Full Race Intake mani
BDL 72mm TB
AEM Series 2 ECU
M&W pro 14 ignition with CBR coils
Custom enclosed Relay box w/ Milspec plug
t1 Camtrigger
Racepak IQ3 display dash
the entire harness was custom built to my specs by my good friend Ryan @ Rywire
T1 ID2000s w/ skunk2 rail
Fuel Lab reg
Dual bosch 044 pumps
T1 catch can
Skunk2 Pro C suspension with drag rear spring rates along with their LCAs
Exospeed 3 piece front end
Exospeed star8 13x9 up front and 15x 3.5 rears
http://img.photobucket.com/albums/v504/sheepeg3/4613915647_7ed8a0a54b_b.jpg
http://img.photobucket.com/albums/v504/sheepeg3/4614538276_5bd5a58508_b.jpg
http://img.photobucket.com/albums/v504/sheepeg3/g-489-7f9487572e326b63c64050542b897.jpg
http://img.photobucket.com/albums/v504/sheepeg3/4614549966_019097aa16_o.jpg
http://img.photobucket.com/albums/v504/sheepeg3/100_0992.jpg
http://img.photobucket.com/albums/v504/sheepeg3/g-489-557e53c864644b61e78ce48482676.jpg
http://img.photobucket.com/albums/v504/sheepeg3/4564210993_0a5fe96cc1_o.jpg