PDA

Orijinalini görmek için tıklayınız : 1998 VTI'a S2000 AP2 Gösterge Montajlamak için Gerekenler



Burak VTEC
21-01-2011, 16:40
Merhabalar,
Bir abimize ait olan 1998 model VTI a s2000 ap2 göstergesi montajlamaya çalışıyoruz. Km/h göstergesi hariç tüm göstergeler faal durumda.Fakat km/h göstergesi montajlanamadı. Aradaki pin ve soketlerde sanırım problem var.
Bu konuyu internet üzerinde arattığımda genelde ara bir parça ile çözmüşler sorunu fakat o parçanın satış linkini bulamadım ve amerikan araçlardaki elektrik tesisatı farklı olabileceği için açıkçası tam bir bilgiye ulaşamadım.

Bu konu hakkında bilgisi olup yardım edebileceklere şimdiden teşekkürler.

gökan
21-01-2011, 17:08
For a couple months now, I've been researching the in's-and-outs of installing an AP1 S2000 cluster in the coupe. Back in late April, I stumbled across a mint cluster on eBay for a mere $150, so I snatched it up.

The only drawback to that 'deal' was that I did not receive the connectors off the back.

So, after a couple more months of searching, and posting several 'WTB' threads, I came to realize no one wanted to part out the plugs from a cluster sale. This left me in a problematic situation, so to speak. http://images.honda-tech.com/set1/smile/emsmilep.gif

Therefore, instead of wasting even more time searching for plugs, my father came up with the idea of desoldering the connectors off the PC board, and wiring directly to it, utilizing the diagrams posted on DSCustoms.com ('bigcalidave' here on H-T). Also, another goal was to be able to switch in between the S2000 cluster, and a factory Civic cluster with minimal headache. The wiring from the PC board at the cluster was then made into a four-plug harness using connectors/pins picked up from RadioShack, and factory S2000 wiring colors were imitated using spare engine harnesses we had laying around. http://images.honda-tech.com/set1/smile/emsmilep.gif

Here's how she looks.

http://i86.photobucket.com/albums/k83/soundinnovations/P1010055-2.jpg

The new harness.
http://i86.photobucket.com/albums/k83/soundinnovations/P1010054-1.jpg

Factory plugs still intact, and functional.
http://i86.photobucket.com/albums/k83/soundinnovations/P1010056-2.jpg

Test-fit with parking lights off.
http://i86.photobucket.com/albums/k83/soundinnovations/P1010057-2.jpg

Lights on.
http://i86.photobucket.com/albums/k83/soundinnovations/P1010058-2.jpg

The bezel that is currently in the works...
http://i86.photobucket.com/albums/k83/soundinnovations/P1010061-2.jpg

http://i86.photobucket.com/albums/k83/soundinnovations/P1010062-2.jpg

gökan
21-01-2011, 17:10
D-Rob's S2000 Cluster-Into-'98-Civic-Coupe Project *Pix0rs* - Page 3 - Honda-Tech (http://www.honda-tech.com/showthread.php?t=2065853&page=3)

JDM VTİ
21-01-2011, 17:12
bu olayı bizde benm teg'e yapacaktık ama yalan oldu :)

yeni parçalarla dewam ediyorum farklı kulvarda :)

bysever
21-01-2011, 17:32
Harika Bi İşlem Bittikden Sonraki Fotoğraflarını Görmek İsteriz Birde Maliyet Nerelere Çıktı..!

gökan
21-01-2011, 17:40
verdıgım lınkte bıtmıs halelrı mevcut:)

MeRtCaN
21-01-2011, 17:54
kolay gelsın sanırım kmh sensoru yuzunden calısmıyor

tarantino
22-01-2011, 00:08
verdıgım lınkte bıtmıs halelrı mevcut:)
link teki ilk videoda çalışmıyo daha sonrasında mil bazın da veya eksik okuyo yani daha onlarda çözememiş