IGO konusunda yardımcı olabilirim. ve ona uygun haritalar konusunda..
Diğer programlara çok girmek istemiyorum açıkçası yardımcı olmaya yetecek bilgim yok
tomtom a uygun yok bildiğim kadarıyla
bende bugün bu karedeniz uşağının sesini arıyodum buldum
Hotfile.com: 1-CLICK Dateihoster: Lazca Navigasyon Ses dosyaları megarsivportal.com.zip
ama uyumlumu bilmiyorum yarın bakabilcem
Create Your Own Content Guide
şu kısmı anlayan/anlatabilecek yardımccı olabilecek biri var mı
ses dosyaları hazır, ama nası .vif yapıcam onu anlamadım
edit:
Windows
1. Download and save Viftool to your computer.
2. Extract the files into the folder containing your 59 voice files.
3. Open a command prompt. To do this, click Start, then click Run, and then type CMD and press the Return key.
4. At the command prompt type the name of the drive where you saved your files, for example:
C:
Then type cd followed by the directory path of the folder in which your voice files are saved. For example:
cd TomTom\Voices
5. Type the following command:
viftool join <number> <name> data<number>.vif
For example:
viftool join 75 John data75.vif
Number refers to a unique file number that each navigation voice must have.
Note: Many numbers are already used by the standard and premium TomTom voices. You can check the numbers that are already in use by looking in the voices folder on your device. Number 71 to 99 are recognized as special voices and it is recommended that you use one of the numbers that are in this range.
Name refers to the name of your voice. It can be between one and eight characters long and must only use ASCII characters.
6. Viftool will then create two files, a .CHK file and a .VIF file. For the above example you would have these two files:
data75.chk
data75.vif
benim çin malı nava attım cuk diye oldu vallahi
kime gösterdiysem gülmekten kendini dışarı attılar
1. Viftool diye bir programı indirmen lazım
2. ses klasöründen 59 tane sesi viftool ile al ve yedekle
3. Çalıştır > CMD yapıp dos ekranı aç
4. sende olan bu 59 sesi direk hdd nin içinde bir klasöre at (C:/ses) gibi ve komut ekranından buraya git
komut ekranında ana sürücüdeyken C:/>cd ses yaz
5. bu klasörün içinde "viftool join <number> <name> data<number>.vif" bu komutu gir
örnek: viftool join 75 John data75.vif
işlem tamamdır
inşallah
Sevindim çalıştırmanıza
Ya yine beceremedim valla, viftool saçma sapan bişey notepadle açılıyo falan normal program gibi açılmıyoki :s ses dosyalarıyla onun bağlantısını sağlayamadım o yüzden..
Şu an 1 kullanıcı var. (0 üye ve 1 konuk)