G-Force 2002 Pro RWD Prelude Photo Shoot and Specs by: GRS Motorsports

http://www.grs-motorsports.com/fotos...isc/0720/1.jpg

GRS-Motorsports.com visited Long Machine & Tool facilities in Cleon Pennsylvania and met the G-FORCE Pro RWD Prelude owned by Mike Long from Levanon, PA

http://www.grs-motorsports.com/fotos...isc/0720/2.jpg

http://www.grs-motorsports.com/fotos...isc/0720/3.jpg

It’s a 2002 Honda Prelude full tube chassis built by Way Cool Race Cars in Lancaster, PA. Everything from chassis, interiors, lexan windows, wiring, plumbing, intercooler pipes, paint and other details were done at the same shop.

http://www.grs-motorsports.com/fotos...isc/0720/4.jpg

http://www.grs-motorsports.com/fotos...isc/0720/5.jpg

The car still has the original Honda body panels even rear bumper cover and working head and tail lights. The one piece front end was originally built on carbon Kevlar by WCRC but then it was modified by Pimar Fiberlgass.

http://www.grs-motorsports.com/fotos...isc/0720/7.jpg

http://www.grs-motorsports.com/fotos...isc/0720/6.jpg

Some of its chassis components are a set of front Strange adjustable struts with Weld Racing Aluma Star 15 X 3.5 wheels and 24.0 X 5.0 X 15 Good Year Tires. At the back a Strange 4.56 ratio rear end with Strange double adjustable shocks and a set of Weld 15 X 14 wheels with 32.5 X 17 X 15 Good Year slicks.

http://www.grs-motorsports.com/fotos...sc/0720/18.jpg

http://www.grs-motorsports.com/fotos...sc/0720/19.jpg

The interiors are a combination between carbon fiber and aluminum, a fiber glass dash with a Race Pack with all the options

http://www.grs-motorsports.com/fotos...isc/0720/8.jpg

The H22A engine was designed by John Lingenfelter back in the days.The cylinder head was ported with a 5 axis CNC machine. Long Machine built many replicas on their shop. The cylinder head was bench tested at Lingenfelter Performance Engineering were John said that it out flow the ECOTech head and if the engine was tuned right it could run 6's and near 200 MPH since he accomplished it on his Pro RWD Cavalier 7 years ago.

http://www.grs-motorsports.com/fotos...isc/0720/9.jpg

http://www.grs-motorsports.com/fotos...sc/0720/10.jpg

http://www.grs-motorsports.com/fotos...sc/0720/11.jpg

Ferrea valvetrain all around with a set of Crane Cams VTEC Killers and Ferrea rockers. JE Pistons on Pauter Rods with Dalton Sleeves, Stock Honda crankshaft. Still 2.2L assembled by Jaime "Negro Racing" Cruz a GForce Transmission dealer. This engine is designed for 10,800 rpm but for now they only will be pushing it to 8,500 rpm. Way Cool Race Cars built turbo manifold holds a 74mm Precision T&E Turbo with a T4 .96 A/R and a S shaft. HKS 60mm waste-gate and 50mm Tial BOV. Cooling system consists of a Meziere Enterprises electric water pump and radiator.

http://www.grs-motorsports.com/fotos...sc/0720/12.jpg

http://www.grs-motorsports.com/fotos...sc/0720/13.jpg

http://www.grs-motorsports.com/fotos...sc/0720/14.jpg

http://www.grs-motorsports.com/fotos...sc/0720/15.jpg

Gato Performance Intake Manifold with a Weldon electric fuel pump and fuel pressure regulator. The engine management system consist of a Big Stuff ECU tuned by Jorge "Oso Tech" Juarbe. The results were 1035 whp at 43 psi without the water cooler. Oso said that it should gain around 30 to 40 extra horse power with the water cooler since it runs on Q16 fuel. A modified Dry Sump was used to work on this reverse rotation engine.

http://www.grs-motorsports.com/fotos...sc/0720/16.jpg

http://www.grs-motorsports.com/fotos...sc/0720/21.jpg

RAM adjustable twin 7" clutch kit was used with a G-Force 5R Reverse Rotation 5 spd clutchless transmission.

http://www.grs-motorsports.com/fotos...sc/0720/17.jpg

http://www.grs-motorsports.com/fotos...sc/0720/20.jpg

The car weights 1,950 lbs w/o driver and last weekend at the 16th Annual Pan American Nationals made his first full pass with 1.19 @ 60', 5.10 @ 660' and 7.89 @ 179 MPH low shifting the engine since they still tuning the suspension.

http://www.grs-motorsports.com/fotos...sc/0720/22.jpg

http://www.grs-motorsports.com/fotos...sc/0720/23.jpg

We asked Long about his future plans with the car and he wants a consistent 7.40's and 7.50's Maybe in a future a bigger turbo will be installed and the RPM and boost will be raise to run those 6 seconds and reach 200 MPH

http://www.grs-motorsports.com/fotos...sc/0720/24.jpg

http://www.grs-motorsports.com/fotos...o/100719/1.jpg

http://www.grs-motorsports.com/fotos...o/100719/2.jpg

http://www.grs-motorsports.com/fotos...o/100719/3.jpg

http://www.grs-motorsports.com/fotos...o/100719/4.jpg

http://www.grs-motorsports.com/fotos...o/100719/5.jpg

http://www.grs-motorsports.com/fotos...o/100719/6.jpg

Now we went to the motor. Its combination was designed by the legendary John Lingenfelter. Originally its Head was designed and the work in carriage was done in a 5 machine CNC Axis where the machines of Long Machine already have several replicas of spare. This head after to be proven in flow bench of Lingenfelter Performance Engineering where “Out Flow” the own head that John in his ECOtec motor used. For those times motor GM generated 1200 HP in engine dyno and had run 6,99 @ 197 MPH in the Cavalier. With these results John him comment to Mike that this one motor (H22) properly tuned could reach the 6 seconds and approach the 200 MPH since had obtained he them in the Cavalier and we are speaking of the 2003, does but of 7 years.

Besides the porting in CNC it counts on “valvetrain” Ferrea, Crane Cams VTEC Killer and his “rockers”. The pistons are of company JE Pistons in Dalton sleves and taken hold Pauter Connecting rods to an original crank Honda. The car even stays 2,2 liters. Jaime “Negro Racing” Cruz, Dealer of G FORCE Transmissions assembled the motor which was designed to be able to turn up to 10.800 RPM although they only think it to take to 8.500 RPM in his first tests. Since we had mentioned previous mind the Manifold by Way Cool RACE Cars holds to a Turbine Precision I disturb 74mm with turbine housing T4,96 A/R in an axis S, waste gate HKS 60mm and blow off valve Tial 50mm. The system of cooling of Honda is an electrical water pump Meziere Enterprises like its radiator.

On the other it divides to a Intake Manifold by Gato Performance where injectors supplied by an electrical gasoline pump are installed Weldon Pumps injected by a system Big Stuff programmed by Jorge “Oso Tech” Juarbe. This combination produced 1.035 whp to 43 PSI, this was without having “to water to air”, Bear comment that with “water to air” must acquire of 30 to 40 additional HP. The fuel that is used is Q16. The lubrication system is in charge of a Dry Sump Moroso which was modified so that he was compatible with a motor series H since this turns against the small hands of the clock.

6 snde 200 mph çok güzel

teşekkür butonu yoktu burda

Teşekkürler

JE Pistons on Pauter Rods


iyimiş:D

:eek::eek::eek: Vtec "O_O

Harika olmuş...