Well Friday and Saturday SpeedFactory took three 67 mm cars to the dyno and mine was one of them. My conservative goal was 750hp so i was pleasantly surprised with my results.
Charge Pipes 3 inch Downpipe Dumptube was fabricated at the shop
aswell as the custom sidewinder.
Precision 46mm wastegate
Precision CEA t4 6765
Precision 825horse intercooler
Golden Eagle Intake Manifold
GE fuel rail
GE alternator relocation kit
Ge headstuds
BDL 70mm throttle body
Fuel system is a sumped tank with twin Bosch 044's
2 -8 lines off the tank to the pumps then y fitting into -10 to the rail
precision 1600cc injectors and an aeromotive fuel pressure regulator.
motor is
arias pistons (10.5:1) with upgraded wrist pins
eagles
stock sleeves
stock port head
stock cams
supertech valvetrain
going to attempt to put the power through my stock ep3 5 speed
