New Zealand's Duke Engines has been busy developing and demonstrating
excellent results with a bizarre axial engine prototype that completely does
away with valves, while delivering excellent power and torque from an engine
much smaller, lighter and simpler than the existing technology. We spoke
with Duke co-founder John Garvey to find out how the Duke Axial Engine
project is going.
Duke Engines' 3-liter, five cylinder test mule is already making a healthy 215
horsepower and 250 lb-ft of torque at 4,500rpm slightly outperforming two
conventional 3 liter reference engines that weigh nearly 20 percent more and
are nearly three times as big for shipping purposes. With an innovative
valveless ported design, the Duke engine appears to be on track to deliver
superior performance, higher compression and increased efficiency in an
extremely compact and lightweight package with far fewer moving parts than
The Duke engine is an axial design, meaning that its five cylinders encircle
the drive shaft and run parallel with it. The pistons drive a star-shaped
reciprocator, which nutates around the drive shaft, kind of like a spinning coin
coming to rest on a table.
The reciprocator's center point is used to drive the central drive shaft, which
rotates in the opposite direction to the reciprocator. "That counter-rotation
keeps it in tidy balance," says Duke co-founder John Garvey. "If you lay your
hand on it while it's running, you can barely detect any motion at all, it's
That's borne out by the video below, where the engine revving doesn't even
cause enough vibrations to tip a coin off its side.
Instead of cam- or pneumatically-operated intake and outlet valves, the
cylinders rotate past intake and outlet ports in a stationary head ring. The
spark plugs are also mounted in this stationary ring the cylinders simply
slide past each port or plug at the stage of the cycle it's needed for and move
on. In this way, Duke eliminates all the complexity of valve operation and
manages to run a five-cylinder engine with just three spark plugs and three
The Duke engine ends up delivering as many power strokes per revolution as
a six cylinder engine, but with huge weight savings and a vast reduction in
the number of engine parts.
The engine has shown excellent resistance to pre-ignition (or detonation)
potentially because its cylinders tend to run cooler than comparable engines.
Duke has run compression ratios as high as 14:1 with regular 91-octane
gasoline. This suggests that further developments will pull even more power
out of a given amount of fuel, increasing the overall efficiency of the unit.
Alternative fuels would appear to be a promising possibility. In a 2012
interview, Garvey said "we just switched it over [to kerosene jet fuel] one day
and it just ran straight away, as well if not better than it was running on
Garvey tells Gizmag "we've developed the engine to the point where we feel
it's ready to be commercialized. But we're still without funding, and we're
looking for the right application to build toward. The engine seems suitable
for a wide range of functions, but we need to find the right funding partner to
develop it toward a niche that can maximize its advantages."
That's unlikely to be automotive in the immediate future; car manufacturers
have already sunk a lot of money into their own engine technology. But
aeronautics, portable generators and marine outboard motors are uniquely
placed to take advantages of the Duke engine's high output, compact
dimensions and low weight.
Another key opportunity might lie in range extender motors for plug-in hybrid vehicles engines that don't drive the wheels, but run at high efficiency to drive generators and top up the battery of electric drive cars.
Duke has partnered with engine development company Mahle in the US, formerly Cosworth in the UK, and is ready to begin commercializing the technology once the right customer comes along.
"The estimate is that it's probably a process of a couple years to get it to production ready," says Garvey. "This has been a huge undertaking, and sometimes you wonder if you should have started in the first place but we've built an engine with some impressive advantages over current technology. It's the smallest and lightest engine around for its displacement and power output.
"Even our prototypes are outperforming established engines of the same displacement and there's a lot of development left in there for further weight reduction and performance gains. So we're very optimistic."