PDA

Orijinalini görmek için tıklayınız : K20 Turbo Honda Civic Eg Hatch



MiaMi
19-06-2008, 14:35
You have two choices when your 600-plus-hp hatchback gets totaled T-bone style just minutes after a couple of 25psi maiden dyno pulls. One involves running home like a baby, scraping ideas of any and all future projects out of pure frustration. The other requires a bit of determination...Some might even say heart. To say Steve Soto manned up after totaling his first magazine-bound, mega-powered EG would be, well, an understatement.

Steve's hatchback addiction is no secret, which is partly responsible for him owning a number of what he endearingly refers to as Honda's "bubble." Fair enough. Few cars are easier to pick, prod at and tune than the '92-'95 Civics. Now would be a good time to mention Steve's past bubble-fied obsessions, his exploits if you will, but frankly, we just haven't the room. What we can tell you is that the list reads a little something like this: '93 turbo B20 VTEC Civic, road race-built CRX, righthand drive '94 turbo K-series Civic and a '93 turbo GS-R, just to name a few. No, by Steve's admission they aren't all bubbles, but neither is the guy's F350 turbo diesel pickup. Anyone else noticing a trend here?

Turbochargers and Hondas are the makings of long lasting relationships. Few engines destined for lives of natural aspiration respond as well as Hondas do when it comes to positive pressure. The K-series is no different and Steve knows that, which is why he's built two similar setups over the span of just a couple of years. Both K-powered, both turbocharged. The RHD arrived first but its life was short lived. The late model 'Vette that sideswiped it made sure of that. But we're not here to talk about Steve's old hatch; it's his latest big-powered EG effort that we care about.

Despite the accident, the K made it out alive. Another EG collecting dust on the side of Steve's house made the decision to take on another project all the easier. The build moved forward with textbook precision. The chassis was stripped to the bone and a 10-point rollcage was fabbed into place. Steve next sent the car off to paint; '06 STi bronze was the color of choice, which made for one of the easiest decisions, he tells us. Of course the engine bay was stripped and wires were tucked, inside and out, prior to paint.

With the hatch at the body shop, the boys at Velocity Trends, Steve's shop, went to town on the K20A2. No, it wasn't damaged from the accident but, with the car away and the engine on the ground, the decision to beef it up further just made sense. Skunk2 valvetrain components were added to the ported head and IPS camshaft combo and the T3 exhaust manifold was upgraded to one with a T4 footprint. Why? Because the GT35R would soon be ditched for a bigger and better GT4294R. Only time will tell what the new setup will yield power-wise but, rest assured, it'll likely make the engine's previous 603hp pull look more like child's play than anything else. Other preparations for new and improved power figures were made, like swapping the 1,000cc injectors for 1,600cc ones from Precision and fitting the EG with a dual-Walbro pump setup. A five-speed transmission yanked from an EP chassis Civic Si was selected for gear bangin' duties and is paired with a Competition twin-disc clutch and flywheel. Such a setup is likely to snap axles like toothpicks, which is precisely why Steve incorporated a set of Driveshaft Shop axles into the build.

Steve is a drag racer. But since this hatchback is known to roam about Jacksonville, Fla., roads more often then you'd think, it's also got to do important things like turn, stop and not bottom out. TEIN flex dampers and springs accompanied with a Skunk2 alignment kit take care of part of this along with the help of Power Slot front and rear discs and Hawk pads. The Full Race traction bars and ARP extended wheel studs serve little purpose on the road but are all but mandatory when slicked down at the strip. Besides, they look cool too.




Propulsion:
K20A2
Five-speed EP3 transmission
Hasport mounts
Golden Eagle sleeves
Wiseco 9.0:1 pistons
Crower rods
IPS camshafts
Skunk2 valves
Skunk2 valve springs
Skunk2 retainers
RBC intake manifold
Two Walbro fuel pumps
Precision 1,600cc fuel injectors
AEM fuel rail
Earl's fuel lines/fittings
Earl's fuel filter
Aeromotive fuel regulator
Garrett GT4294R turbocharger
Precision 750 FMIC
Velocity Trends 3-inch piping
TiAL 50mm blow-off valve
TiAL 44mm wastegate
Velocity Trends exhaust manifold
Velocity Trends 3-inch downpipe
Competition Clutch twin-disc clutch
Competition Clutch flywheel
Quaiffe LSD
Driveshaft Shop axles
GM Solenoid (boost controller)
Hondata K-Pro engine management

Stance:
TEIN flex dampers
TEIN flex springs
ASR rear upper strut bar
ITR rear antiroll bar
Si front antiroll bar
10-point rollcage
Skunk2 alignment kit
SPC toe adjusters
Full Race traction bars
Skunk2 rear lower control arms

Resistance:
Power Slot discs
Hawk pads
DOT3 fluid
Goodridge lines
ARP extended wheel studs

Rims & Rubber:
16x7 Rays Gram Lights (+42 offset)
205/40-16 Toyo Proxes

Outside:
'06 STi Bronze Metallic paint
Spoon carbon-fiber rear spoiler
Carbon-fiber rear hatch

Inside:
JDM ITR Recaros
Takata harnesses
NRG steering wheel
NRG quick release
NRG Shorty wheel hub
JDM gauge cluster
JDM climate control
Carbon-fiber center console
Carbon-fiber lower console
GReddy turbo timer
AEM UEGO wideband controller
Stewart Warner tachometer
Auto Meter boost gauge
GReddy oil pressure gauge

Props:
Velocity Trends Inc.
Velocity Trends crew: Noah, Mony,Adam, Mike, Thomas and Bryan
Tachyon Racing Heads crew
Chris at Competition Clutch
Tong at Skunk2
Cesar at Sik Creations
Mike from AFM
Velocity Towing
And don't forget, Odalys, the Wife

Owner Specs:
Hometown: Jacksonville, Fla.
Most played in the iPod: Steely Dan
Favorite kicks: Throwback Pumas
Recent DVD: Superbad
Bogus traffic tickets: Stopped for the RHD EG
Mac or PC: PC
Favorite non-Honda: Nothing, except for my John Deere lawn mower
Porn star pick: My wife...seriously
Hottest model: My wife...you've got to see her

http://image.automotive.com/f/images/9725805/htup_0804_22_z+k20_turbo_honda_civic_eg_hatch+fron t_view+front_mount_intercooler_nitrous_express_spr ayer.jpg
http://image.automotive.com/f/images/9725787/htup_0804_00_z+k20_turbo_honda_civic_eg_hatch+fron t_side_view+action_shot.jpg
http://image.automotive.com/f/images/9725799/htup_0804_05_z+k20_turbo_honda_civic_eg_hatch+k20_ motor_garrett_gt4294r_turbocharger.jpg
http://image.automotive.com/f/images/9725811/htup_0804_08_z+k20_turbo_honda_civic_eg_hatch+k20_ motor_garrett_gt4294r_turbocharger_no_filter.jpg
http://image.automotive.com/f/images/9725817/htup_0804_23_z+k20_turbo_honda_civic_eg_hatch+rear _view+spoon_sports_carbon_fiber_rear_spoiler_carbo n_fiber_rear_hatch.jpg
http://image.automotive.com/f/images/9725823/htup_0804_24_z+k20_turbo_honda_civic_eg_hatch+16_x _7_rays_gram_lights_et_42.jpg
http://image.automotive.com/f/images/9698653/htup_0804_27_z+k20_turbo_honda_civic_eg_hatch+garr et_turbo_tial_wastegate.jpg
http://image.automotive.com/f/images/9698647/htup_0804_14_z+k20_turbo_honda_civic_eg_hatch+10_p oint_weld_in_roll_cage_takata_harness_jdm_itr_reca ros.jpg
http://image.automotive.com/f/images/9698659/htup_0804_20_z+k20_turbo_honda_civic_eg_hatch+aem_ air_fuel_ratio_gauge_autometer_boost_gauge.jpg
http://image.automotive.com/f/images/9698665/htup_0804_15_z+k20_turbo_honda_civic_eg_hatch+insi de_view+10_point_weld_in_roll_cage_takata_harness_ jdm_itr_recaros.jpg
http://image.automotive.com/f/images/9698677/htup_0804_02_z+k20_turbo_honda_civic_eg_hatch+tein _flex_dampers_and_springs_skunk2_lower_control_arm s.jpg
http://image.automotive.com/f/images/9698695/htup_0804_21_z+k20_turbo_honda_civic_eg_hatch+inte rior_view+jdm_itr_recaro_seats_takata_4_point_harn ess.jpg
http://image.automotive.com/f/images/9698719/htup_0804_06_z+k20_turbo_honda_civic_eg_hatch+velo city_trends_turbo_exhaust_manifold.jpg
http://image.automotive.com/f/images/9698725/htup_0804_08_z+k20_turbo_honda_civic_eg_hatch+k20_ motor_garrett_gt4294r_turbocharger_no_filter.jpg
http://image.automotive.com/f/images/9698731/htup_0804_04_z+k20_turbo_honda_civic_eg_hatch+aero motive_fuel_regulator_earls_fuel_lines_and_fitting s.jpg
http://image.automotive.com/f/images/9698737/htup_0804_09_z+k20_turbo_honda_civic_eg_hatch+moto r_brace.jpg
http://image.automotive.com/f/images/9698743/htup_0804_31_z+k20_turbo_honda_civic_eg_hatch+k20_ motor_garrett_gt4294r_turbocharger.jpg
http://image.automotive.com/f/images/9698749/htup_0804_29_z+k20_turbo_honda_civic_eg_hatch+haso rt_motor_mount.jpg
http://image.automotive.com/f/images/9698779/htup_0804_13_z+k20_turbo_honda_civic_eg_hatch+fron t_side_view+action_shot.jpg

Erol
19-06-2008, 14:39
çok iyii...

STP
19-06-2008, 14:46
hık dedım kaldım ahh ahh

nitrO_Oxide
19-06-2008, 14:47
cok guzel yaa

nası gittiğini düşünemiyorum...

yusufbatırel
19-06-2008, 14:58
kaput nıe acık:D

STP
19-06-2008, 15:05
kaputun acık olması buna yakısmamıs ama EK kasalara yakısıyor bence,bırde o acıklık ıslevsellık olsun dıye yapılmıs bırsey sıcak havanın oradan tahlıye edılmesı amac...

sulhi
19-06-2008, 15:07
ben k20 turbo demem benım k20 turbom oLmayınca ama ej20 mım var benım benım oLDUĞU için ahıuahauha

yusufbatırel
19-06-2008, 15:16
kaputun acık olması buna yakısmamıs ama EK kasalara yakısıyor bence,bırde o acıklık ıslevsellık olsun dıye yapılmıs bırsey sıcak havanın oradan tahlıye edılmesı amac...
ayarlanıyor ozaman acık kalcak sekılde turbonun agzıda acıkta zarar vermıyormu.bı cıtırdan fıltre olaymıs daha guzel olmazmıymıs.

MiaMi
19-06-2008, 15:44
Sanırım resim çekmek için filtre çıkartılmıştır. Videolarına bakıyorum araçın.

Dynatech
19-06-2008, 16:13
Süper alet de owner spec lerde iyiymiş..:D:D

SOMEONESPECIAL
19-06-2008, 16:22
Herşeyi 4x4 lük olabilir ama şu ön lip neden böyle bel vermiş anlamadım :soru:


http://img232.imageshack.us/img232/8088/htup080422zk20turbohondjw2.jpg (http://imageshack.us)

JJmusti
19-06-2008, 16:35
arabanın motoru cok ıyı..
ama on tarafı duzensız duruyoo :S

Sheyhzade
19-06-2008, 16:52
You have two choices when your 600-plus-hp hatchback gets totaled T-bone style just minutes after a couple of 25psi maiden dyno pulls.

araç pert olmuş gayet doğal böyle biçimsiz olması :D

MiaMi
19-06-2008, 16:53
Beyler bu arada araçta egsoz gören varmı.

SERKANS
19-06-2008, 16:58
Herşey iyi güzelde, hepinizmi İngiizce biliyorsunuz biriniz benim için çevirin o zaman bir zahmet,,

SubieGuy
19-06-2008, 18:07
Owner Specs:
Hometown: Jacksonville, Fla.
Most played in the iPod: Steely Dan
Favorite kicks: Throwback Pumas
Recent DVD: Superbad
Bogus traffic tickets: Stopped for the RHD EG
Mac or PC: PC
Favorite non-Honda: Nothing, except for my John Deere lawn mower
Porn star pick: My wife...seriously
Hottest model: My wife...you've got to see her[/B]


Allah Allah, kim "beğendiğiniz porno yıldızı" sorusuna "karım" diye cevap verir ki? Hahahahaa

EG çok güzel olmuş valla, Pistte slicks kullanıyormuş zaten, ama o lastiklerle caddede tahminen 180-200 kmh'a kadar patinaj yapıyordur.

Schumi
19-06-2008, 18:11
Piste çıkıyormuş arkadaşta minnacık fren var :D

egb@lo
19-06-2008, 18:16
mükemmellll

alp1903
19-06-2008, 18:46
gt42 daha ne olsun yahu :D

ali
19-06-2008, 20:52
Herşeyi 4x4 lük olabilir ama şu ön lip neden böyle bel vermiş anlamadım :soru:


önden darbeli :D:D

ARDA_E
19-06-2008, 23:01
mükemmel :) önde bir kaç ayarsızlık var kazalı bir araba değil..

senna
19-06-2008, 23:31
gt42 daha ne olsun yahu :D


gt4088r:)

eğer fotodakiyse:)

miniks
19-06-2008, 23:39
arac iyi olmuş ama K20a org da genelde k24 dü turboluyorlar ve en büyük4088 takıolar 650 hp lere cıkanlar var
kaputun arkasının kalkık olması eski bişeydir önden giren soguk hava içerde ısınıp kalmaması için yapılır hatta sileceklerin ordaki plastikte sökülür genelde

turbonun agzında filitre olmaması da full randıman alabilmek için olsa gerek

miniks
19-06-2008, 23:41
gt4088r:)

eğer fotodakiyse:)

sanki 4294 de daha cok benziyor gibi emmenin coolera basan kısmı baya bir geniş görünüyor tabi yanılıyorda olabilirim

tool
19-06-2008, 23:44
bu kaputun yarim kalkik olmasida cok sacma,
reverse scoop eklese yeterdi...

Schumi
19-06-2008, 23:45
bu kaputun yarim kalkik olmasida cok sacma,
reverse scoop eklese yeterdi...
İşlevselliği varmı bunun yoksa bir modamı ?

senna
19-06-2008, 23:46
sanki 4294 de daha cok benziyor gibi emmenin coolera basan kısmı baya bir geniş görünüyor tabi yanılıyorda olabilirim


4294 6 bıçaklı 4088r 7 bıçaklı pale sahip compressor pali

4294ün compressor turbine housing outlet bağlantıları v band bu civata ile bağlanmış compressor housingi ayrıca compressor inleti 4 inç 4294 5inç compressor inlete sahip

tabi daha farklılıklar mevcut tabiiki bunlar göze görünenler:)

miniks
19-06-2008, 23:59
ebesinin mıymış semih nelere dikkat etmişin biz alıp takıyoruz işte :p:p

Schumi
20-06-2008, 00:07
4294 6 bıçaklı 4088r 7 bıçaklı pale sahip compressor pali

4294ün compressor turbine housing outlet bağlantıları v band bu civata ile bağlanmış compressor housingi ayrıca compressor inleti 4 inç 4294 5inç compressor inlete sahip

tabi daha farklılıklar mevcut tabiiki bunlar göze görünenler:)
Turbolar ile bozduğunu yazılardan anlıyordum daa... Gece rüyalarına girecek derecede olduğunu bilmiyordum. Maşallah diyeyim ne diyeyim :)

senna
20-06-2008, 00:27
turboları severim:)

Schumi
20-06-2008, 00:30
Bu sevgi değil aşk :D Neyse aşağıya bakalım

İşlevselliği varmı bunun yoksa bir modamı ?

güncel ?

senna
20-06-2008, 01:08
Bu sevgi değil aşk :D Neyse aşağıya bakalım


güncel ?



hava akımı sayesinde sıcak havayı daha kolay atabilir sanırım bu sayede tabi bi denemek lasım

Schumi
20-06-2008, 01:13
hava akımı sayesinde sıcak havayı daha kolay atabilir sanırım bu sayede tabi bi denemek lasım
Yok mantıken ölede. İspatlanmış bişimi yani. Yani ne bilim böle olunca hararet göstergesi daha düşük felan :)

alp1903
20-06-2008, 01:26
bende böle acık kaputun daha hızlı hava tahliyesi olucagını düşünüyorum

alp1903
20-06-2008, 01:30
gt4088r:)

eğer fotodakiyse:)

yok ben fotografa bakıp sölemedim zaten söleyemezdimde gerçi:p yazılan bilgilere baktım direk ordan okudum söledim.;)

M_PROJECT
20-06-2008, 01:42
4294 6 bıçaklı 4088r 7 bıçaklı pale sahip compressor pali

4294ün compressor turbine housing outlet bağlantıları v band bu civata ile bağlanmış compressor housingi ayrıca compressor inleti 4 inç 4294 5inç compressor inlete sahip

tabi daha farklılıklar mevcut tabiiki bunlar göze görünenler:)

bsg .

TAM35GNY
20-06-2008, 06:41
Yaw bu boya isleri cok karisik burda ben hic guzel boyanmis araba gormedim henuz ama bu fotolardakiler fena degil ne is anlamadim..

Onuralp
20-06-2008, 09:08
Evet araç çok iyi de nie ön taraftan kamyon geçmiş gibi duruo?
Onun haricinde hayalimiz, projemiz, herşeyimiz... :D :D :D

Pardon yazıyı sonradan okudum :D

ozKn
20-06-2008, 13:06
süper ötesi bişey :D

ulasstoprak
20-06-2008, 13:30
moral bozuklugu...:(