ayrıca herkesin bayramın en içten dileklerimle kutlarım...
Tufan benim GT'de kat iptalinden dolayi olan ariza i$igi (Anti-pollution faulty) en fazla 2 gunde geciyordu.. Normal kullanarak devam et bakalim
Kontak kapatip acmayla sonmedi hic, kafasina gore biraz![]()
ne dertli arabaymış ya bu 207 rc lerbişi dicem siizn bu başınıza gelenelr mini içinde geçerlimi onu bunu deiştiriosunuz sağlamını takıosunuz filan
Team PAŞAOĞLU
benim de 207RC si olan bir iki arkadaşım var 2009 model onlarında hiçbir sorunu yok deli gibi de gazlıyorlar..
benim RC ilk çıkan RC lerden ama sorun yok bu sente olayını hallettim
16 Kalem parça değişti 200 TL tuttu minileri tahmin edemiyorum
şimdi de elektrovana değişecek 40-50 liralık bir parça
mini 207 farketmiyor bu motorun ilk jenerasyonunda sorunlar var alman mini forumlarına baktım aynı sorunlar zincir gergi vs...
207oc den bir çocuk canı sıkılınca GT sine water/weth takmış sınuçları okuyunca siznde çok hoşunuza gidecek..
meth siz 183 whp meth ile 196 hp dynoda ...
[quote author=Lee_rsa link=topic=7873.msg95307#msg95307 date=1284037021]
Hi guys... Well this week saw me get bored... So installed a Frieling Racing water injection system.....
It makes a big difference!!!!!
Here are a few pix... Excuse the quality and lack of a ton of pix.. But wanted to get the install done and dusted...
Only pic I never took was the controller unit.. Will update pix tomorrow with it showing the controller situated in the glove box and the Switch I will mount in the dash to show the system is on or armed or off....
The water injection pump
the system solonoid shown under IC
The injection point.....
Car on the dyno so we could tweek the kit
[/quote]
[quote author=Lee_rsa link=topic=7873.msg95332#msg95332 date=1284065714]
Well we tested with water and not meth... Without it on it makes 183wbhp and active 196wbhp... We are currently re-doing the mapping as I need to pull the timing a little more.... There is zero "pinking" at 1.5 bar boost... So timing is'nt the issue... We wanna do the map so I deliver the torque a little later and hold it longer... but the boost is good.. holding 1.3 bar @ 6300 rpm...
[/quote]
Şu an 1 kullanıcı var. (0 üye ve 1 konuk)